Liqui Moly Underseal, 1000ml is a bitumen-free corrosion protection agent, forms a protective layer with a good effect of fading noise produced by impact and offers very high resistance to erosion. It can be applied with a coat of varnish and dries quickly. Good adhesion on the lower parts of the floor and on lacquered surfaces.
Benefits of Liqui Moly Underseal, 1000ml:
- high content of solid particles.
- elastic protection
- can be painted when dry
- good antitrumming effect
- noise damping at wheel arches
How to use: The surfaces to be treated with the black protective antiphon must be thoroughly cleaned beforehand. Rust must be removed. Surfaces must be dry and clean of dirt, grease and dust. The ear protection can be applied at an operating pressure of 2-8 bar depending on the desired spray mode. Shake the contents of the box vigorously before use. Do not leave the containers open as a dent will form on the surface of the material. The coating material can be applied on vertical surfaces with a wet film thickness of up to 1.5 mm. It is recommended to be sprayed using a cross pattern to avoid spray shading. The vehicle will be ready to drive after about 2 hours depending on the weather conditions and the thickness of the cover. The final drying takes approx. 12 hours. The surface covered with the protective antiphon can be painted with commercially available paints for vehicles (conventional and water-based) under the following conditions:
- after the coated surface has dried for at least 12 hours, "spray" the paint in a thin layer
- do not apply the last coat of paint after the previous coat has started to dry
- final drying in the oven can be performed at 60 ° C.
Do not spray on moving parts and hot components such as mechanical joints, engine, transmission, crankshaft, exhaust pipe, catalytic converter and braking systems.