Liqui Moly Stoneguard, Grey, 500ml is a coating material with solvent content, with residual elasticity and viscous, with optimal coating capacity. After drying, the coating provides corrosion protection resistant to abrasion with good protection characteristics against impact with stones and an exceptional effect of fading the noise produced by impact. It can be covered with wet, PVC compatible varnish. It is possible to color by mixing the original varnish of the car.
Benefits of Liqui Moly Stoneguard, Grey, 500ml:
- good coverage
- can be painted immediately
- extremely high ultraviolet resistance
- solvent resistant (when completely dry)
- high resistance to sanding
- Compatible with PVC
- after drying, very easy to sand
- excellent impact protection with stone with antitrumming effect
- covers the paint mist
How to use: Surfaces to be treated with rust protection wax must be thoroughly cleaned beforehand. Rust must be removed. Surfaces must be dry and clean of dirt, grease and dust. The material is recommended to be used at room temperature. Shake the dose vigorously. When the ball is no longer heard, continue to shake the dose for more than a minute. Keep the dose upright when spraying and apply a thin layer at a distance of about 20-30 cm from the surface. Resistance to abrasion and corrosion increases with increasing layer thickness. For this reason, the spraying process must be repeated once or twice, after a short drying period. Liqui Moly Stoneguard, Grey, 500ml should be sprayed using a cross pattern to avoid spray shading. If the surface is painted later, the layer becomes harder and harder, which means that the surface will have to be treated as a plastic, ie with adhesive primer for plastics. Shake well before use!