2-Components Polyurethane Adhesive Mannol 2K-Pur, 24ml

2-Components Polyurethane Adhesive Mannol 2K-Pur, 24ml is a bicomponent adhesive based on polyurethane for reliable bonding and cosmetic repair of various surfaces and parts and especially for repairing leaks and cracks. Quickly and reliably binds parts from all plastic materials and all metals and alloys in any combination. Suitable for concrete, stone and wood. Ideal for quick repairs with long-lasting effects, e.g. for filling cracks and cavities on surfaces of all shapes. It can be used in the repair of vehicles and other machinery, as well as in industry, daily life and offices.

Properties:

- it hardens completely in 20-30 minutes at room temperature, after which any mechanical processing is possible;
- after hardening, it has exceptional elasticity and high durability, which it keeps for a long time;
- has very high adhesive properties;
- it does not change its volume during hardening - that is, it does not shrink;
- does not contain water and solvents, is odorless;
- thixotropic: When applied, it does not run without external influences;
- absolutely resistant to water, mold and fungal microorganisms, oil products;
- resistant to weather influences and aging. It withstands temperatures from -60 °C to +120 °C.

Application:

1. Thoroughly clean the bonding surfaces of old paint and other coatings, dirt, grease and oil deposits. Remove the burrs from the front side with a file and model the perforated surface evenly forming a tesserae. Sand the damaged area with sandpaper in a radius of 5-7 cm around the perimeter of the piercing or cracks.
2. Degrease using 9691 MANNOL Brake Cleaner. Roughen surfaces for best results. Let it dry.
3. Apply a mesh of suitable dimensions inside the hole or crack to be treated, overlapping the edges of the hole by at least 5 cm. For large holes, it is recommended to apply a second layer of mesh, overlapping the first layer by 50%. On the front side, apply the foil supplied with the kit on the surface to be treated. Bonding can take place in any conditions of temperature and humidity, however a temperature of +10 to +30 °C and a humidity of 50-60% is optimal.
4. Squeeze the required amount of the two components from the double syringe and mix well. The mixing ratio is 1:1. Apply the mixture on the inner side of the reinforcing mesh on the entire treated surface. Smooth the applied layer with a trowel, taking care not to apply excessive force to avoid the compound tightening on the front side.
5. After 10 minutes, remove the foil from the front side, let the compound harden and apply MANNOL Epoxy-Plastic 9904 on the treated surface in preparation for later painting.

Setting time 4-6 minutes after mixing. After 8-10 minutes, the adhesive is already resistant to deformation. Complete hardening takes 20-30 minutes, depending on the surrounding temperature. Do not apply the product at temperatures below 0 °C. Keep well closed in the original packaging, in a cool and dry place, at temperatures between +5 °C and +25 °C.

Quantity: 30g (24ml)